04 sonata 2.4 Crank sensor replacement

I have a 2.4 an need to replace the crank sensor,How do I get the wire out from behind the PS pump? Have the timing cover off can see the sensor ok but the wire runs behind the ps an belt adjuster pully,   Thanks for any help   Chestnut

Hi Guys, Well to late now its done. First you need to remove all acs, belts ,then timing covers, an water pump an crank pully, in behind timing belt is crank sensor so timing belt has to come off to, ( useing a cam lock tool saves a lot of headache's) pull sensor wire out from behind  T belt an out of cover ,install new sensor an place wire back in cover (has two clips to hold it in place, then put every thing back together,Watch for All timing marks . this job isn't that bad to do but still a PIA.    have a good day     Chestnut1