poacher
10/20/2005 12:58:37 AM
I need a 98 or below Tib engine for a Accent swap I want to do, if you have any leads let me know.
whiterice
12/15/2005 5:53:00 PM
i have one..... in pieces
poacher
12/16/2005 1:57:33 AM
What condition is it in? I need to find one to build another Accent project. Any problems with the block, and what is included?
whiterice
12/16/2005 1:22:49 PM
condition is ok it just needs to be cleaned up the block that is. i had sucked some water into the manifold and one of the cyclinders froze up. after taking it apart i saw everything was fine just the one piston had a little resistance in it when pulling it out. i have the (pistons minus new rings), intake, t.b., coil pack, rods, bearings, pulleys, head (dissasembled and cleaned), sensors, injectors, rail, etc
it does need thermostat housing, trans., rings, gaskets, whatever bearings you might want to replace , etc.
if you are really interested we can talk over to the phone so we make sure we get everything squared away.
poacher
12/17/2005 2:10:48 AM
That might not be a bad idea, and we are both from PA so it might not be very difficult to set up.
poacher
1/30/2006 3:39:08 PM
how much do you want for it?
