grommit
8/6/2006 1:26:14 PM
hi trouble magnets
i have an accent 1300cc 'x' reg with the management light lit on the dash
can i remove the battery and reconnect after a while to extinguish faults and light?
thanx in advance
sameoldd5
8/17/2006 11:53:47 PM
you should be able too....just unplug the battery for 10-20 min and it should reset the ecu. but if there is a proble, expect the light to come back on.
flave1
8/21/2006 5:44:31 PM
sorry no on the later accents the fault is stored in the ecu and cannot be erased without the diagnostic equiptment.
