Cant find this bl**ping balance shaft alignment plug

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

Cant find this bl**ping balance shaft alignment plug

Printable Version

Hyundai Forum >> Vehicle Line Up >> Hyundai Sonata >> Cant find this bl**ping balance shaft alignment plug

Page: [1]

Message

<< Older Topic Newer Topic >>

Cant find this bl**ping balance shaft alignment plug - 11/24/2007 4:25:50 AM

wheredoesthisgo

Posts: 3
Joined: 11/20/2007
Status: offline

I am trying to find this bl**ping balance shaft alignment plug to change the B timing belt. The manual illustration is useless. One post says its near the exhaust manny. I removed the whole manifold. I see a set screw (small phillips head) in the middle of the block facing the front of the car but a screwdriver will not go in the 2 inches its supposed to. I rotated the gear 360 degrees, nothing. Anyone have a picture of it. Is it on the front of the block facing the front of the car or on the drivers side of the block with the gears and belts? I am dismantleing everything to find this dang thing. 1995 sonata 4 cyl. P vin 2.0 liter. Someone must have changed their B belt and used this(one of the steps in the manual). There are a couple of bolts holding the dipstick in im going to try next. Is it on the oil pump cover. Dont really want to start removing those bolts because then I need to replace the gasket and once again they show a special tool. Any help would prevent a suicide by multiple blows to the head with a 4lb hammer.
Thanks all.