crankshaft sprocket removal?

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

crankshaft sprocket removal?

Printable Version

Hyundai Forum >> Vehicle Line Up >> Hyundai Accent >> crankshaft sprocket removal?

Page: [1]

Message

<< Older Topic Newer Topic >>

crankshaft sprocket removal? - 12/30/2007 10:41:15 PM

shawnboy

Posts: 30
Joined: 11/6/2007
Status: offline

I'm still in the process of replacing my timing belt and tensioner. I figured, if i take off the crankshaft sprocket I will have room to pry the tensioner spring back on. However, I'm not positive on how to remove the crankshaft sprocket. Should I use a puller? I don't see a bolt on the end. Some sort of ring with or key shaped piece.

Post #: 1

RE: crankshaft sprocket removal? - 12/31/2007 5:36:55 AM

madindian1

Posts: 274
Joined: 12/26/2007
Status: offline

what you can do is spray some liquid wrench on it then try to pry it off. you can use two screw driver(flat head) if you don't have a pry bar.

_____________________________

if i'm not doing **** at work i will help you

(in reply to shawnboy)

Post #: 2

RE: crankshaft sprocket removal? - 12/31/2007 6:11:31 AM

retsam

Posts: 11
Joined: 9/15/2007
Status: offline

Hello ShawnBoy,

Geez you did get a lot of problem...
It is true I have never replace yet a Timing belt tensionner.
But I have replace 3 timing belt.
My first one on a ford escort96
second on my sister accent 2002 1.5L
third on my accent 2001 1.6L

They where all easy work and I am not a mecanic.
If you install your tensionner correctly your belt should slide in easy
(tensionner compress)

Have fun,

(in reply to madindian1)

Post #: 3