Primary Resistance on Coil ???????? (Full Version)

Hyundai >> Vehicle Line Up >> Hyundai Elantra

Primary Resistance on Coil ????????

  

AManiscalco2007 -> Primary Resistance on Coil ???????? (1/3/2008 2:55:57 PM)

Hey Experts,

I have another question for you. In my manual it is telling me that the primary windings resistance in the coil should be 0.45 to 0.55 ohms. I tested it using a digital voltmeter on the 200 ohm setting and got 1.1 ohm on both. Does this mean that the coil is no good?

  
madindian1 -> RE: Primary Resistance on Coil ???????? (1/3/2008 8:31:44 PM)

well is the car running? according to the specs. it would seem as if the coil is no good but i say if it's working that would tell me that the coil is good. sometimes those specs tell you what to look for when diagnosing a problem, if you had came up with a number like 2.5 ohms then you know you have a problem.

AManiscalco2007 -> RE: Primary Resistance on Coil ???????? (1/5/2008 5:26:28 AM)

Yeah, it was runninhg but loping at idle and throughout driving. I visually inspected the coil pack after I removed it from the car. Looking in the plug posts on the coil pack I noticed that #1 cylinders's post internally was corroded very badly. The rest of them were fine.. I am just gonna replace the coil pack. Thanks.

  

Page: [1]

Return to Hyundai Forum home page or view the Full Version of this page.