Corrosion on Cylinder 1 coil output! (Full Version)

Hyundai Forums >> Vehicle Line Up >> Hyundai Elantra

Corrosion on Cylinder 1 coil output!

AManiscalco2007 -> Corrosion on Cylinder 1 coil output! (1/3/2008 4:21:51 PM)
I checked the coil thorougly and 2, 3 and 4 on the coil output were the plugwire connects were clean. However, the #1 was corroded. Any Ideas?

madindian1 -> RE: Corrosion on Cylinder 1 coil output! (1/3/2008 8:33:23 PM)
i would just clean it, try to install some di-electric grease to prevent the corrosion next time.

AManiscalco2007 -> RE: Corrosion on Cylinder 1 coil output! (1/5/2008 5:28:50 AM)
I did do that and I also cleaned the entire coil pack because, it had oil residual all over it from the valve covers leaking. I am just gonna go ahead and replace it because, it still ran rough after. I am actually just gonna buy everything new, to be safe. What brand do you recommend?

madindian1 -> RE: Corrosion on Cylinder 1 coil output! (1/5/2008 2:21:33 PM)
remember try dealer parts especially plug wires.

AManiscalco2007 -> RE: Corrosion on Cylinder 1 coil output! (1/6/2008 5:07:40 AM)
Yes, i'll do just that. Thanks again.

Page: [1]

Return to Hyundai Forum home page or view the Full Version of this page.