control arm installation (Full Version)

Hyundai >> Vehicle Line Up >> Hyundai Tiburon

control arm installation

10splaya22 -> control arm installation (1/4/2008 12:40:02 PM)
Hello, I have a 2003 tiburon gt v6 and recently ran into a curb which I ended up bending the drivers side control arm. I have a new one and would like to know if anyone has any tips or tricks on installing it. Is there anything that requires a special tool and anything extra I have to take off? I have an impact wrench in case you are wondering. Thanks!

madindian1 -> RE: control arm installation (1/4/2008 4:10:38 PM)
there's no trick in replacing the control arm it is pretty straight forward. if you run in any problem just let me know.

10splaya22 -> RE: control arm installation (1/4/2008 8:48:10 PM)
Alright, thanks. I was just wondering if there was any specific torque settings the bolts had to be tightened to

Page: [1]

Return to Hyundai Forum home page or view the Full Version of this page.