01 sonata code P0500
Login | |
|
01 sonata code P0500 - 1/30/2008 3:04:45 PM
|
|
|
gussetgus
Posts: 5
Joined: 1/7/2008 Status: offline
|
2.4 engine. Says vehicle speed sensor a malfunction. where is this sensor? bought the car a few weeks ago. so far the lot has sent it out to fix the crank sensor. when we picked it up the ck eng light came back on and now the speedo will not work. Took it back to the repair shop and they claim to have changed the speed sensor. but the speedo still wont work.any sugestions?
|
|
|
|
|
|
RE: 01 sonata code P0500 - 1/31/2008 5:11:38 AM
|
|
|
NovaResource
Posts: 415
Joined: 5/29/2005 Status: offline
|
P0500 = Vehicle Speed Sensor Malfunction - The Vehicle Speed Sensor (VSS) is not reading (functioning) properly - There is a broken/frayed wire leading to the vehicle speed sensor The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. If everything looks OK, replace the sensor.
_____________________________
Octane Truth: Regular or Premium? (Car and Driver Magazine: November 2001)
|
|
|
|
RE: 01 sonata code P0500 - 1/31/2008 6:37:04 AM
|
|
|
madindian1
Posts: 262
Joined: 12/26/2007 Status: offline
|
what actually happened is that whoever had the car replaced the right front axle and didn't noticed that the ring tone wheel on axle is not on it. that's probably why you're getting that code. not the sensor in the tranny, the one on the axle at the right front hub.
_____________________________
if i'm not doing **** at work i will help you
|
|
|
|
RE: 01 sonata code P0500 - 1/31/2008 2:33:27 PM
|
|
|
gussetgus
Posts: 5
Joined: 1/7/2008 Status: offline
|
Ill have to pull the wheel on the right front. They changed the crank position sensor and you have to pull the right front wheel and splash guard off so maybe they knocked something off or broke a wire. The speedo was working when my son first had it it wasnt working after they fixed the crank pos sensor. thanks for the help everyone
|
|
|
|
Contact Us |
Advertising |
Automotive Directory |
Archive |
About Us |
Hyundai Links |
Legal |
Privacy Policy |
© Hyundai Forum
Hyundai Forum .com is not affiliated with or endorsed by Hyundai Motor Company.
|