Troublecode Help...

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

Troublecode Help...

Printable Version

Hyundai >> Vehicle Line Up >> Hyundai Accent >> Troublecode Help...

Page: [1]

Message

<< Older Topic Newer Topic >>

Troublecode Help... - 3/22/2008 11:19:25 AM

Jr1964

Posts: 1
Joined: 3/22/2008
Status: offline

'02 Hyundai Accent, have 2 trouble codes...

1. P1522

2. P0722

Any help with code meaning and how to fix would
be appreciated.

_____________________________
Jim

Post #: 1

RE: Troublecode Help... - 3/22/2008 12:21:00 PM

ken99

Posts: 399
Status: offline

P0722 indicates a bad pulse generator in the transnission, a sensor that monitors rpm on the transfer shaft. I couldn't find a specific reference to P1522, but I suspect it is a general error code issued by the ECM when the TCM flagged the problem with the pulse generator. There are two technical service bulletins regarding the replacement of the PG-B, #03-40-016 and #03-40-022. Both can be found at http://www.hmaservice.com/ . 016 is specific to the 2000-2002 Accent. 022 covers a wider range of models. Replacing the pulse generator and reseting the codes should solve your problem.

(in reply to Jr1964)

Post #: 2

RE: Troublecode Help... - 3/22/2008 7:17:26 PM

retsam

Posts: 10
Joined: 9/15/2007
Status: offline

Please don't go too fast for changing a sensor, Those 2 sensor (pulse Generator A & B) are connected on the same harness, connected with a cheap connector.

The best way it is to remove the battery and tha battery tray.
and clean that connector and add some electric grease.
I have remove PGA for fun and found out with a multimeter it was working correctly.
It was on my sister hyundai accent 2002.
And like Ken99 says you have a TSB on that.

It should not be more then 30min.

Have Fun.

(in reply to ken99)

Post #: 3