Hyundai Forum   Hyundai Classifieds   Photo Gallery   Member List   Calendars   Search   Contact HF   Sponsors
  Hyundai Lineup   Hyundai News   Hyundai Recalls   TSBs   Timeslips   Register   Login

Service manual for slushbox replacement

  Printable Version
Hyundai Forums >> Vehicle Line Up >> Hyundai Tiburon >> Service manual for slushbox replacement Page: [1]
Login
Message << Older Topic   Newer Topic >>
Service manual for slushbox replacement - 3/23/2008 7:53:45 AM   
rexmp

 

Posts: 1
Joined: 3/23/2008
Status: offline
Hi,

Looks like my daughter's Tib will need the auto replaced soon. Wondering if there's a decent manual or maybe a photo tutorial online describing what's involved.

Fluid is light brown, smells a little burnt, and there are scraping noises coming from the trans. She reports loss of power going uphill. About 80k on the clock.

This doesn't sound like a situation that a fluid and filter will resolve, does it?

Thanks . . .
Post #: 1
RE: Service manual for slushbox replacement - 3/23/2008 4:43:37 PM   
ken99

 

Posts: 399
Status: offline
quote:

Wondering if there's a decent manual or maybe a photo tutorial online describing what's involved.


From http://www.hmaservice.com/:


  2003 > G 2.7 V6 DOHC > Automatic Transaxle System


REMOVAL1.Remove the engine cover.



2.Remove the battery terminal.



3.Remove the air duct.



4.Remove the battery tray.



5.Remove the air cleaner.

(1)Upper



(2)Lower



6.After removing the CKP sensor, O2 sensor and oil pressure switch wiring bracket, separate the connectors.



7.Remove the speedometer sensor connector.

8.Remove the transaxle range switch.



9.Remove the oil cooler hose.



10.Remove the clip (transaxle side) of the shift cable.



11.Separate the steering column shaft joint.


12.Separate the power steering oil pump hose.

Be careful not to leak after separating.

13.Separate the hose after removing the clip of the power steering return hose.



14.Remove the upper connecting transaxle bolt.



15.Separate the start motor.



16.Install the engine support fixture.

17.After removing the tire, remove the caliper.



18.Remove the transaxle side cover.



19.Remove the transaxle under cover.



20.Separate the tie rod end.



21.Remove the wheel speed sensor and the knuckle mounting bolt.



22.Drain the oil.


< Message edited by ken99 -- 3/23/2008 4:55:32 PM >

(in reply to rexmp)
Post #: 2
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Hyundai Forums >> Vehicle Line Up >> Hyundai Tiburon
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
doohickie856
novaresource580
poacher551
wheelbroker1499
ken99399
madindian1267
patrick237
brant215
chad@junblus171
flave1162

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

Hyundai Forum .com is not affiliated with or endorsed by Hyundai Motor Company.