what is this cold start engine noise

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

what is this cold start engine noise

Printable Version

Hyundai >> Vehicle Line Up >> Hyundai Accent >> what is this cold start engine noise

Page: [1]

Message

<< Older Topic Newer Topic >>

what is this cold start engine noise - 4/5/2008 12:43:46 PM

ddown

Posts: 6
Joined: 4/25/2006
Status: offline

I have an 06 accent with about 46000 miles on it and it now makes a very annoying clatter in when started cold. Check out the video and please let me know if it is injector noise, piston slap, or normal valvetrain noise? Thanks a bunch.

http://youtube.com/watch?v=ynFFRf-wriE

Post #: 1

RE: what is this cold start engine noise - 4/5/2008 4:41:10 PM

ken99

Posts: 399
Status: offline

Does the noise dissipate as the engine warms up? If so, how long does it take for the noise to disappear? Please read the technical service bulletin in the attached graphic. I would guess the described problem would be worse with a cold engine.

Thumbnail Image

Attachment (1)

< Message edited by ken99 -- 4/5/2008 4:48:24 PM >

(in reply to ddown)

Post #: 2

RE: what is this cold start engine noise - 4/5/2008 5:15:35 PM

ddown

Posts: 6
Joined: 4/25/2006
Status: offline

Ive always used OEM filters and yes, it goes away completely after it warms up. Is this piston slap? or loud injectors? It's really annoying and loud as you drive off.

(in reply to ken99)

Post #: 3

RE: what is this cold start engine noise - 4/5/2008 6:07:15 PM

ken99

Posts: 399
Status: offline

I think this engine has hydraulic actuators (analogous to lifters in a push rod engine) that will clatter if starved for oil, but will quiet down once oil pressure and flow builds up. Piston slap or a bad wrist pin noise usually don't go away. The audio sounds like unusual valve train noise. It should be covered by warranty, so I'd take it to a dealer.

< Message edited by ken99 -- 4/5/2008 6:08:37 PM >

(in reply to ddown)

Post #: 4