Help!! (please)

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

Help!! (please)

Printable Version

Hyundai >> General Hyundai Forums >> General Tech Help >> Help!! (please)

Page: [1]

Message

<< Older Topic Newer Topic >>

Help!! (please) - 10/18/2005 10:07:44 PM

Boston_Comic

Posts: 2
Joined: 10/18/2005
Status: offline

Hello Fellow Forumites,
My 1999 Elantra has run great up until the other day. At the same time the check engine light came on, it started skipping like crazy. I checked the plugs, they're ok. Nearest Hyundai dealer is a ways away and I don't trust many area tech's. Are there any ways to check codes by one's self? Any help would be greatly appreciated...

Post #: 1

RE: Help!! (please) - 10/19/2005 7:59:15 AM

Brant

Posts: 215
Joined: 9/19/2005
Status: offline

What do you mean by "Skipping"?? Is the engine sputtering?? Loss of power??
Might be something simple if you can be a bit more discriptive.

(in reply to Boston_Comic)

Post #: 2

RE: Help!! (please) - 10/19/2005 9:53:11 PM

Boston_Comic

Posts: 2
Joined: 10/18/2005
Status: offline

Brant,
Thanks. The skip is steady. I would swear someone removed a plug wire. Regardless of RPM, driving situation, the skip is there. Never gets worse, never gets better. I pulled the plugs and they all look to be working. It doesn't seem easy to pull the plug wires one by one to see which cylinder is missing. Like I say, it's like a dead hole....And it started exactly the same time the "Check Engine Light" came on.

Thanks!

(in reply to Brant)

Post #: 3

RE: Help!! (please) - 10/20/2005 11:25:01 AM

sudsy

Posts: 11
Joined: 9/30/2005
Status: offline

it might be your fuel filter

_____________________________

[img]sudsy69

(in reply to Boston_Comic)

Post #: 4

RE: Help!! (please) - 10/20/2005 6:45:44 PM

poacher

Posts: 551
Joined: 10/20/2005
Status: offline

This could be a ton of things. If you run it hard then it might have jumped time. The fuel filter is a big possibility, depending on your miles. When comes to reading your codes, unless you have a code reader then there is no way. A good code reader is a very expensive, but a good investment. I would replace the fuel filter as a first step and check all of the wiring. If that fails and your not real sure of your automotive skills, then send it to a shop.

(in reply to sudsy)

Post #: 5