1998 hyundai atoz uk model

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

1998 hyundai atoz uk model

Printable Version

Hyundai Forums >> General Hyundai Forums >> General Tech Help >> 1998 hyundai atoz uk model

Page: [1]

Message

<< Older Topic Newer Topic >>

1998 hyundai atoz uk model - 9/4/2008 9:15:25 AM

robby

Posts: 2
Joined: 9/4/2008
Status: offline

hi, anyone know how i can remove the washer bottle to change the pump please.
pics would be great as i am not too technical

Post #: 1

RE: 1998 hyundai atoz uk model - 9/4/2008 8:03:22 PM

ken99

Posts: 666
Status: offline

quote:

hi, anyone know how i can remove the washer bottle to change the pump please.

The Atoz is not sold in the U.S., so most forum members do not have specific technical information available on this model from the usual sources. I''''ll take a stab at it though.

I''''m guessing the filler neck to the windshield washer tank is under the hood on the passenger side next to the fender and it disappears through the fender wall. On most small cars, the tank is mounted in the wheel well between the fender and the plastic fender liner. If this describes your situation, you need to jack the right front of the car up on a jack stand (don''''t trust a jack by itself) and remove the right front wheel. Look around the inside of the wheel well with a flashlight or trouble light. You should find screws or similar connectors holding the liner in place. Remove all of these and slip the liner out of the well. You should then find the tank bolted to the fender. Remove the wiring connector from the pump, unbolt the tank and it should come out. On some cars (I have a Nissan Sentra like this), the filler neck is two piece and either twist or slips apart from the tank for removal. In the U.S., there are universal replacement pumps available that are fairly easy to install. I hope this helps.

P.S. Silly me, I forgot that UK vehicles are right hand drivers. Regardless of whether the tank is on the left or right, the concept and process is the same.

< Message edited by ken99 -- 9/4/2008 8:08:37 PM >

(in reply to robby)

Post #: 2

RE: 1998 hyundai atoz uk model - 9/4/2008 10:54:46 PM

robby

Posts: 2
Joined: 9/4/2008
Status: offline

thanks, will look later today.

(in reply to ken99)

Post #: 3