2000 Accent Audio Wires

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

2000 Accent Audio Wires

Printable Version

Hyundai Forum >> Vehicle Line Up >> Hyundai Accent >> 2000 Accent Audio Wires

Page: [1]

Message

<< Older Topic Newer Topic >>

2000 Accent Audio Wires - 1/24/2006 5:20:47 PM

ModelPOS

Posts: 2
Joined: 1/24/2006
Status: offline

Hey there peoples. I've got a blue 2000 Hyundai accent and I've had it for about two years now. I've played with everything from the bumpers to the engine to the sunroof, but I cannot, for the life of me figure this one out.

When I bought it, I got it for a couple grand, but it came with no stereo. For a while, I had fun only listening to the engine make its crazy noises as I shifted gears, but I just got a really cool CD player and a bunch of speakers amps wires and other such from a friend of mine to put in it. My problem is, however, that the little plastic guy that all the audio wires are supposed to run to and plug into the female version out to the CD player, is missing. So what I have is about a dozen loose wires. I've looked all over the internet and through the library, but can find nothing to tell me which color wire goes to what. So I came here.

What I have is listed below.

1 Orange
1 Orange with a black line
3 Blue
1 Pink
1 Green
1 Green with a black line
1 Green with a brown line
1 brown
1 white
1 red
1 black

Now, I've figured out at least that the black is ground. But I need to know which others are which. All I really MUST have is which is Antenna, Battery and Ignition. The speakers I can figure out on my own.

Please help me out here. I'm sick of hearing the animal whistles on the front of the car.

Post #: 1

RE: 2000 Accent Audio Wires - 1/26/2006 1:51:18 PM

poacher

Posts: 551
Joined: 10/20/2005
Status: offline

I have to look, but there are a couple that I know for sure. Red=power, black=ground, yellow=ignition, blue=remote. I will get back to you with the rest.

(in reply to ModelPOS)

Post #: 2