Clutch Problem (Full Version)

Hyundai Forums >> Vehicle Line Up >> Hyundai Tiburon

Clutch Problem

  

jakeb157 -> Clutch Problem (4/12/2006 4:26:03 PM)

Hello
I recently replaced my clutch and now i only have like a 3" swing to my clutch pedal. i havent tryed to start it or move it as of now. Ive had the transmission out about 4 times trying to find out whats wrong and everything seems to be ok. if anyone has experienced this before please help me.

  
flave1 -> RE: Clutch Problem (4/14/2006 5:31:35 PM)

has anyone tried adjusting the clutch pedal buddy im sure there is a rod near the pedal which is adjustable.[:D]

jakeb157 -> RE: Clutch Problem (4/18/2006 4:15:37 PM)

no there is nothing on the pedal that is adjustable b/c i thought the same thing.

flave1 -> RE: Clutch Problem (4/19/2006 5:03:27 PM)

in that case have you tried bleeding the system?

jakeb157 -> RE: Clutch Problem (4/20/2006 3:59:12 PM)

yup completely cleaned the system, new fluid and bleed the system.

flave1 -> RE: Clutch Problem (4/23/2006 2:12:48 PM)

ok so can you engage any gears without stalling or any crunching?

jakeb157 -> RE: Clutch Problem (4/24/2006 3:36:52 PM)

at that time no i couldnt. but i found out why i had the short swing was b/c the slave cyl. was bottoming out. but it still wasnt disengaging al lthe way. no i needed the car to drive home b/c my college year ended so i mod. the release lever so it did disengage but im going to have to find out why it didnt want to disengage before.

flave1 -> RE: Clutch Problem (4/24/2006 3:44:25 PM)

this might sound daft but have you got the correct clutch kit installed because if you can move the slave to the end of its stroke then it must be a mechanical fault like either the wrong release bearing or pressure plate?

jakeb157 -> RE: Clutch Problem (4/24/2006 6:46:52 PM)

yeah we thought the same thing but we measured both sets and they are within .001 of each other. not enough to make a difference.

flave1 -> RE: Clutch Problem (4/27/2006 5:02:51 PM)

is it the pull type clutch as in the 1.8/2.0/2.7 or is it the push type in the 1.6?

  

Page: [1] 2   next >   >>

Return to Hyundai Forum home page or view the Full Version of this page.