Changing spark plugs on Santa Fe (Full Version)

Hyundai >> General Hyundai Forums >> General Tech Help

Changing spark plugs on Santa Fe

Boomer -> Changing spark plugs on Santa Fe (4/19/2006 8:23:56 AM)
I decided to change the plugs in my 2003 Santa Fe 2.7 V6 and much to my dismay found that the 3 plugs on the back side are virtually impossible to get to without quite a bit of disassembly. Anyone know of any way around taking off half of the intake system?

flave1 -> RE: Changing spark plugs on Santa Fe (4/19/2006 4:57:03 PM)
unfortunately no although you can do it keeping the pipes on the throttle body on.Easy way i find is to undo the bolts in the center of the inlet and the 3 bolts at the back supporting the manifold and it should give you enough clearance to get to the plugs(careful not to damage the ht leads)[:D]

Boomer -> RE: Changing spark plugs on Santa Fe (4/19/2006 5:08:36 PM)
Will this save the gasket or will I need to replace the gasket?

flave1 -> RE: Changing spark plugs on Santa Fe (4/23/2006 1:36:58 PM)
no mate you can re use the gasket.

Page: [1]

Return to Hyundai Forum home page or view the Full Version of this page.