Changing spark plugs on Santa Fe

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

Changing spark plugs on Santa Fe

Printable Version

Hyundai >> General Hyundai Forums >> General Tech Help >> Changing spark plugs on Santa Fe

Page: [1]

Message

<< Older Topic Newer Topic >>

Changing spark plugs on Santa Fe - 4/19/2006 8:23:56 AM

Boomer

Posts: 2
Joined: 4/19/2006
Status: offline

I decided to change the plugs in my 2003 Santa Fe 2.7 V6 and much to my dismay found that the 3 plugs on the back side are virtually impossible to get to without quite a bit of disassembly. Anyone know of any way around taking off half of the intake system?

Post #: 1

RE: Changing spark plugs on Santa Fe - 4/19/2006 4:57:03 PM

flave1

Posts: 162
Joined: 1/6/2006
Status: offline

unfortunately no although you can do it keeping the pipes on the throttle body on.Easy way i find is to undo the bolts in the center of the inlet and the 3 bolts at the back supporting the manifold and it should give you enough clearance to get to the plugs(careful not to damage the ht leads)