|
buddrinker -> Timing belt removal (6/19/2006 6:58:56 PM)
|
Hello I am trying to get the crank pulley off so I can change my timing belt on my 1995 1.6 ltr dohc. I have removed the drivers side motor mount and the front motor mount and dropped the engine down some and it still will not come off. All the bolts are off and its just loose. I have tried pulling it out fromthe bottom but that still doesn't work. Is there a trick to this? The nut on the end of the crank seems to be in the way but I have no idea how this comes off or if it does come off. Please any help would be appreciated.
Thanks
Budd
|
|
|
|
