Timing belt removal

Printable Version

Hyundai >> Vehicle Line Up >> Hyundai Elantra >> Timing belt removal

Page: [1]

Login Message << Older Topic   Newer Topic >>

Timing belt removal - 6/19/2006 6:58:56 PM    buddrinker   Posts: 2 Joined: 6/19/2006 Status: offline Hello I am trying to get the crank pulley off so I can change my timing belt on my 1995 1.6 ltr dohc. I have removed the drivers side motor mount and the front motor mount and dropped the engine down some and it still will not come off. All the bolts are off and its just loose. I have tried pulling it out fromthe bottom but that still doesn't work. Is there a trick to this? The nut on the end of the crank seems to be in the way but I have no idea how this comes off or if it does come off. Please any help would be appreciated. Thanks Budd Post #: 1

RE: Timing belt removal - 6/26/2006 8:42:38 AM    titusrogers   Posts: 5 Joined: 6/20/2006 Status: offline Dont know if this will help too much but here is a guide from the autozone website. http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1d/61/15/0900823d801d6115.jsp (in reply to buddrinker) Post #: 2

RE: Timing belt removal - 6/29/2006 12:08:55 AM    buddrinker   Posts: 2 Joined: 6/19/2006 Status: offline Thanks titusrogers I went to that site. I did not realize that you had to remove the crank bolt. I didn't even know it was a bolt. thanks again budd (in reply to titusrogers) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Hyundai Prices

Hyundai
Hyundai Tiburon
Hyundai Santa Fe
Hyundai Accent
Hyundai Azera
Hyundai Elantra
Hyundai Excel
Hyundai Sonata
Hyundai Tucson

Top 10 Posters
doohickie 888 novaresource 667 poacher 551 wheelbroker1 504 ken99 441 madindian1 268 patrick 237 brant 215 chad@junblus 171 flave1 162

New Vendors
K&N Engineering, Inc.