|
ken99 -> RE: Trim removal around stereo?? (3/29/2008 7:24:42 PM)
|
From http://www.hmaservice.com/: 1998 Sonata 9.Floor console. (1)Remove the console upper cover plate. (2)Remove the console upper cover assembly. (3)Disconnect the connectors. (4)Remove the floor console. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-Y313-IMAGES-ENG/Y60-047B.gif[/image] 10.Lower crash pad center facia panel. (1)Remove a screw. (2)Using the screwdriver, pry out the facia panel. (3)Disconnect the connectors. (4)Remove the lower crash pad center facia panel. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-Y313-IMAGES-ENG/Y60-047C.gif[/image] 11.Remove the radio and disconnect the connectors. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-Y313-IMAGES-ENG/Y60-047D.gif[/image] 2001 Sonata d.Remove the console switch mounting cover and console upper cover. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-EF13-IMAGES-ENG/esa9035a1.gif[/image] e.Remove the heater control, the center facia panel, the floor console. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-EF13-IMAGES-ENG/esa9040f1.gif[/image] f.Remove the audio unit. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-EF13-IMAGES-ENG/esa9040g1.gif[/image] 2005 Sonata CENTER FACIA PANEL REPLACEMENT 1.After disconnecting the connector (A), remove the center facia panel (B). [image]http://www.hmaservice.com/viewer/img/note_icon.gif[/image] - When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. - Put on gloves to protect your hands. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-EF13-IMAGES-ENG/lsre170f.gif[/image] 2.Installation is the reverse of removal. AUDIO ASSENBLY REPLACEMENT 1.Remove the center facia panel. 2.Loosen the screws. [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-EF13-IMAGES-ENG/lsre170p.gif[/image] 3.Disconnect the audio connector (A) and antenna cable (B), then remove the audio assembly (C). [image]http://www.hmaservice.com/data/Passenger/HY/HMA/ENG/SHOP-Images/HY-EF13-IMAGES-ENG/lsre170q.gif[/image] 4.Installation is the reverse of removal.
|
|
|
|