Trim removal around stereo??

Printable Version

Hyundai Forums >> Vehicle Line Up >> Hyundai Sonata >> Trim removal around stereo??

Page: [1]

Login Message << Older Topic   Newer Topic >>

Trim removal around stereo?? - 6/24/2006 6:38:11 PM    redsoxfever04   Posts: 1 Joined: 6/24/2006 Status: offline i just bought my parents 98 sonata from them and i want to put my pioneer deck in but i cant get the trim around the stereo off to install the damn thing. i tried prying it but i dont want to damage it. have any suggestions on a good way to remove it? Post #: 1

RE: Trim removal around stereo?? - 6/1/2007 6:36:08 AM    Doug R   Posts: 1 Joined: 6/1/2007 Status: offline I'm having the same problem with my 2005 model. No one has any suggestions? (in reply to redsoxfever04) Post #: 2

RE: Trim removal around stereo?? - 3/29/2008 1:21:53 PM    n2ho   Posts: 9 Joined: 1/6/2007 Status: offline The same question about 2001 Sonata - how to remove the trim to replace a radio? Anyone please? (in reply to Doug R) Post #: 3

RE: Trim removal around stereo?? - 3/29/2008 7:24:42 PM    ken99   Posts: 349 Status: offline From http://www.hmaservice.com/: 1998 Sonata 9.Floor console. (1)Remove the console upper cover plate. (2)Remove the console upper cover assembly. (3)Disconnect the connectors. (4)Remove the floor console. 10.Lower crash pad center facia panel. (1)Remove a screw. (2)Using the screwdriver, pry out the facia panel. (3)Disconnect the connectors. (4)Remove the lower crash pad center facia panel. 11.Remove the radio and disconnect the connectors. 2001 Sonata d.Remove the console switch mounting cover and console upper cover. e.Remove the heater control, the center facia panel, the floor console. f.Remove the audio unit. 2005 Sonata CENTER FACIA PANEL REPLACEMENT 1.After disconnecting the connector (A), remove the center facia panel (B). - When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. - Put on gloves to protect your hands. 2.Installation is the reverse of removal. AUDIO ASSENBLY REPLACEMENT 1.Remove the center facia panel. 2.Loosen the screws. 3.Disconnect the audio connector (A) and antenna cable (B), then remove the audio assembly (C). 4.Installation is the reverse of removal. < Message edited by ken99 -- 3/29/2008 7:36:23 PM > (in reply to redsoxfever04) Post #: 4

RE: Trim removal around stereo?? - 3/30/2008 6:23:19 AM    n2ho   Posts: 9 Joined: 1/6/2007 Status: offline Thank you! (in reply to ken99) Post #: 5

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Hyundai Prices

Hyundai
Hyundai Tiburon
Hyundai Santa Fe
Hyundai Accent
Hyundai Azera
Hyundai Elantra
Hyundai Excel
Hyundai Sonata
Hyundai Tucson

Top 10 Posters
doohickie 839 poacher 551 wheelbroker1 492 novaresource 415 ken99 349 madindian1 262 patrick 237 brant 215 chad@junblus 171 flave1 162

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.