mbazdell
Posts: 2
Joined: 6/28/2006
Status: offline
|
Well just my luck, I'm driving 120 KM/h down the highway in the pouring rain and my wipers get stuck. The motor is still going so I figure I'm still safe from an expensive repair. I get home and take the wiper blades off, the plastic cover piece, and figure out how it all works. Quite simple really. All I had to do was to pop on the motor to the wiper arms piece.. Literally it just pops on.
However now, it poped off again. So doing the same thing I did last time, I pop it back on, put it all back together, and test it out. Pop. Comes off... So I take it all apart again, pop it back on, put it all back together and test it. Pop. Off again. This time instead of taking it all apart, I'm debating if I have to take the arms out and find some way to make it hold. Any ideas?
When I put it on, it was really an easy push.. A little too easy. Am I not pressing hard enough? It didn't seem like it could move any more... Any suggestions would be great.
|
Printable Version
Windshield Wipers - 
