How do you remove turn signal lens assembly on 2000?

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

How do you remove turn signal lens assembly on 2000?

Printable Version

Hyundai >> Vehicle Line Up >> Hyundai Tiburon >> How do you remove turn signal lens assembly on 2000?

Page: [1]

Message

<< Older Topic Newer Topic >>

How do you remove turn signal lens assembly on 2000? - 8/15/2006 5:07:45 PM

surfdog4

Posts: 7
Joined: 8/4/2006
Status: offline

I've been trying to figure out how to get to the turn signal bulbs on my son's 2000 TIburon...the lenses are actually loose.

The online workshop manual for 2000 is wrong..it shows removing a screw.but there are no screws on this lens The 2001 manual looks correct..but it just says "remove turn signal lens assembly" to get to the screws for the headlight. It shows a screwdriver looks like prying the lens assembly out

Is that how you get the turn signal lenses out? Just pry on them? Am afraid to try that without confirmation but i can't see how else they are removed..

and why are they loose? anyone else have this problem?

Thanks!

Post #: 1

RE: How do you remove turn signal lens assembly on 2000? - 8/18/2006 5:24:24 PM

flave1

Posts: 162
Joined: 1/6/2006
Status: offline

look straight down over the indicator and headlamp and you will see a single philips head screw undo it and using a large flat head screw driver behind the indicator lamp and pop it out (leaver it out with a quick movement )towards the front.

(in reply to surfdog4)

Post #: 2

RE: How do you remove turn signal lens assembly on 2000? - 8/21/2006 10:33:50 PM

surfdog4

Posts: 7
Joined: 8/4/2006
Status: offline

thanks..turns out the P.O. had broken the pins that slide into the headlamp assembly..i guess in a previous attempt to get the lens out..anyway the top tab was broken on one of them so I got out the good old' J-B Weld to fix it

(in reply to flave1)

Post #: 3