2000 Elantra Engine "stalls' when applying gas pedal

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

2000 Elantra Engine "stalls' when applying gas pedal

Printable Version

Hyundai >> Vehicle Line Up >> Hyundai Elantra >> 2000 Elantra Engine "stalls' when applying gas pedal

Page: [1]

Message

<< Older Topic Newer Topic >>

2000 Elantra Engine "stalls' when applying gas pedal - 10/30/2006 9:07:17 AM

CoolElantra

Posts: 4
Joined: 10/30/2006
Status: offline

I have an issue arise while working on my Brake Booster.

I know I have a leak in the brake booster now. But I disconnected the vacuum line to the brake booster and the car idles fine again, but if I give it gas it stalls. Like I'm flooding the engine?

The check Engine light has come on. I reset it with disconnecting the battery cable and it was fine for hours then the Check Engine came on again.

I changed plugs and am thinking about spark plug wires but think it's probably related to the other work I was doing, even though the brake booster vacuum hose has been disconnected and plugged.

I'm really trying to avoid an expensive Dealership Repair job. My 2000 Elantra brake booster is $95 for this part, Hyundai wanted $396.

Labor is of course expensive too at the dealerships (any of them), so I'm trying to do it myself.

< Message edited by CoolElantra -- 10/30/2006 9:08:37 AM >

Post #: 1

RE: 2000 Elantra Engine "stalls' when applying gas... - 1/16/2007 12:20:03 PM

Casper84

Posts: 22
Joined: 1/12/2007
Status: offline

Fuel injection system faulty
Fuel filter clogged
Loose Fuel injector wire harness connectors
Defective ECU or information sensor

The ECU sensor is mostlikely the reason your engine light come on after reset but youcan take it in to auto part store and have codes ran on it for free when check engine light comes on

_____________________________

TLB

(in reply to CoolElantra)

Post #: 2