How to replace transmission valve body?

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

How to replace transmission valve body?

Printable Version

Hyundai Forums >> Vehicle Line Up >> Hyundai Elantra >> How to replace transmission valve body?

Page: [1]

Message

<< Older Topic Newer Topic >>

How to replace transmission valve body? - 2/20/2007 4:20:40 PM

MiguelMckaintt

Posts: 19
Joined: 1/14/2007
Status: offline

Hi everbody ,i am having some transmision shifting problems i went on hmaservice.com a site dedicated to hyundai techs, However the fault code that i got fron a scanner indicated a Pulse generator in the transmission valve body that has a short ,what i need to know is how do i remove the valve body what are the screws you remove i took apart the oil sump pan,and transmission filter already, i would appreaciate if i could get some pic showing me which screws to remove thanks in advance.

Post #: 1

RE: How to replace transmission valve body? - 1/9/2008 4:09:59 AM

keremaras

Posts: 1
Joined: 1/9/2008
Status: offline

can you find how to replace got the same problem thanks

(in reply to MiguelMckaintt)

Post #: 2

RE: How to replace transmission valve body? - 1/9/2008 9:17:05 AM

madindian1

Posts: 267
Joined: 12/26/2007
Status: offline

it's not in the transmission valve body. what year elantra do you have? well it said pulse generator so i'm assuming it's the older elan., the sensor is on the top and at the bottom side of the trans close to the oil pan. if it is the newer elan. then you can replace whichever one it calls for, input or output sensor.

_____________________________

if i'm not doing **** at work i will help you

(in reply to keremaras)

Post #: 3

RE: How to replace transmission valve body? - 1/9/2008 2:00:48 PM

AManiscalco2007

Posts: 50
Joined: 1/2/2008
Status: offline

http://www.hmaservice.com/

Signup and register, Find your vehicle under the shop link and some info is there on your valve body dissasembly/reassembly, etc.....

Or buy a haynes menu

_____________________________

Italian Stallion

(in reply to madindian1)

Post #: 4