Clinking noise when going into reverse or drive

Printable Version

Hyundai Forums >> Vehicle Line Up >> Hyundai Santa Fe >> Clinking noise when going into reverse or drive

Page: [1]

Login Message << Older Topic   Newer Topic >>

Clinking noise when going into reverse or drive - 5/15/2007 2:03:14 AM    gatorwv   Posts: 11 Joined: 4/24/2007 Status: offline Just wanted all to know that there is a tech bulletin out for a clinking noise when going from park to drive or into reverse...I experienced this, and mine was the 1st one the dealer did....Doesn't take alot of time, and they did a great job........I'm just wondering, after awhile, the plastic or nylon bushings they use will obviously wear out, and then this will probably get into an expense since they have to pull the axles to fix it. Post #: 1

RE: Clinking noise when going into reverse or drive - 6/24/2007 8:18:36 PM    bcme136   Posts: 1 Joined: 6/24/2007 Status: offline Do you have a TSB number? Assuming your refering to the 2007. (in reply to gatorwv) Post #: 2

RE: Clinking noise when going into reverse or drive - 6/25/2007 2:50:04 AM    gatorwv   Posts: 11 Joined: 4/24/2007 Status: offline The TSB number is 07-50-005     you can log on to hmaservice.com for info on all......................... (in reply to gatorwv) Post #: 3

RE: Clinking noise when going into reverse or drive - 6/25/2007 2:50:09 AM    gatorwv   Posts: 11 Joined: 4/24/2007 Status: offline The TSB number is 07-50-005     you can log on to hmaservice.com for info on all......................... (in reply to gatorwv) Post #: 4

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Hyundai Prices

Hyundai
Hyundai Tiburon
Hyundai Santa Fe
Hyundai Accent
Hyundai Azera
Hyundai Elantra
Hyundai Excel
Hyundai Sonata
Hyundai Tucson

Top 10 Posters
doohickie 890 novaresource 752 poacher 551 ken99 530 wheelbroker1 512 madindian1 274 patrick 238 brant 215 chad@junblus 171 flave1 162