|
poacher -> RE: how many people in this forum have a forced induction hyundai (10/20/2005 8:08:50 PM)
|
Hey there. I have a 95 Hyundai Accent 3-door. I use a turbonetics 3/4 hybrid. I had also done the Tib DOHC 2.0 swap. It wasn't to hard to hook up the turbo, I fabbed my own manifold for optimum flow, the hardest part was plumbing up the oil lines as you probably know when a kit is not available. I am currently using a turbo X blowoff but will upgrade soon. Internals were beefed up for the extra compression and I left N/A comp at 9:0:1 pushing only 9 lbs. I machined my own internals; rings,rods crank. Got better bearings and had to lighten the the rotating mass for reliability. I ported and polised the sucker as well as a good valve angle job. I fabbed my own intake and fuel rail to make sure the engine had enough to drink when the pedal got heavy. Other mods were done of course but I don't have time to go into them now. Horses are at 315 with 286 ft.lbs. 1?4 mile is at a rough mid 11. traction is a big issue. The engine is very reliable because of the drop compression, boost controller, and turbo timer. Any more questions just ask. I was also looking to open a performance line of my own parts, got any tips to get started?
|
|
|
|
