how many people in this forum have a forced induction hyundai

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

how many people in this forum have a forced induction hyundai

Printable Version

Hyundai >> General Hyundai Forums >> Off Topic >> how many people in this forum have a forced induction hyundai

Page: [1]

Message

<< Older Topic Newer Topic >>

how many people in this forum have a forced induction h... - 6/21/2005 5:46:56 PM

pure performance

Posts: 54
Joined: 6/6/2005
Status: offline

Just want to know how many people in here have a turbo or supercharger in their Hyundai let me know, and also what supporting mods are done and how you did it .let me know what you think of it and any numbers you might have as far as performance like quarter mile or dyno and how well the car runs and dependability.

_____________________________

I own a Speed shop in fond du lac Wi which is primarly a DSM shop but do work on any other vehicle that wants to go to the next level, and have also turbo charged a 98 tiburon.920-948-6587 Tony

Post #: 1

RE: how many people in this forum have a forced inducti... - 10/20/2005 8:08:50 PM

poacher

Posts: 551
Joined: 10/20/2005
Status: offline

Hey there. I have a 95 Hyundai Accent 3-door. I use a turbonetics 3/4 hybrid. I had also done the Tib DOHC 2.0 swap. It wasn't to hard to hook up the turbo, I fabbed my own manifold for optimum flow, the hardest part was plumbing up the oil lines as you probably know when a kit is not available. I am currently using a turbo X blowoff but will upgrade soon. Internals were beefed up for the extra compression and I left N/A comp at 9:0:1 pushing only 9 lbs. I machined my own internals; rings,rods crank. Got better bearings and had to lighten the the rotating mass for reliability. I ported and polised the sucker as well as a good valve angle job. I fabbed my own intake and fuel rail to make sure the engine had enough to drink when the pedal got heavy. Other mods were done of course but I don't have time to go into them now. Horses are at 315 with 286 ft.lbs. 1?4 mile is at a rough mid 11. traction is a big issue. The engine is very reliable because of the drop compression, boost controller, and turbo timer. Any more questions just ask. I was also looking to open a performance line of my own parts, got any tips to get started?

(in reply to pure performance)

Post #: 2

[Awaiting Approval]

Chad@junblusa.com