Bleeding the Fuel pressure down on the Fuel rail.

Printable Version

Hyundai Forums >> Vehicle Line Up >> Hyundai Elantra >> Bleeding the Fuel pressure down on the Fuel rail.

Page: [1]

Login Message << Older Topic   Newer Topic >>

Bleeding the Fuel pressure down on the Fuel rail. - 6/23/2005 10:06:03 PM    Non_Affiliated   Posts: 4 Joined: 6/23/2005 Status: offline Anyone have a safe way of bleading the fuel rail pressure down to remove the Feul rail and Intake manifold off of a 1.6L DOHC Elantra motor? Post #: 1

RE: Bleeding the Fuel pressure down on the Fuel rail. - 6/24/2005 6:11:39 PM    hyundai tech   Posts: 136 Joined: 6/7/2005 Status: offline Engine cold, stick some rags under the fuel line where it meets the rail. slowly break your bolts loose while wearing safety goggles.W ash gas from hands after you do. This is the best way to disconnect fuel rail to my knowledge. (in reply to Non_Affiliated) Post #: 2

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Hyundai Prices

Hyundai
Hyundai Tiburon
Hyundai Santa Fe
Hyundai Accent
Hyundai Azera
Hyundai Elantra
Hyundai Excel
Hyundai Sonata
Hyundai Tucson

Top 10 Posters
doohickie 856 poacher 551 novaresource 521 wheelbroker1 499 ken99 399 madindian1 267 patrick 237 brant 215 chad@junblus 171 flave1 162

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.