Clutch help
Login | |
|
Clutch help - 8/18/2007 4:29:58 AM
|
|
|
coupeRd
Posts: 7
Joined: 8/18/2007 Status: offline
|
Yer i have a 96 hyundai coupe/tiburon and the clutch is gettin on my nerves. It releases the clutch point at the very end of pressing the pedal, like i mean really at the end, how would i change this so that it releases at a lower point thanks
|
|
|
|
|
|
RE: Clutch help - 8/19/2007 2:08:20 PM
|
|
|
Joshewuhh
Posts: 124
Joined: 8/8/2007 Status: offline
|
Sounds like its time for a new clutch. You disc and pressure plate are just about toast. I assume it grabs also at a high rpm?
|
|
|
|
RE: Clutch help - 8/19/2007 11:56:32 PM
|
|
|
coupeRd
Posts: 7
Joined: 8/18/2007 Status: offline
|
na it doesnt grab at high revs or anything its just the friction point needs to be adjust like the clutch is all good anything its just that its friction point releases at a high point like not half way just near the end blahhh its annoyin
|
|
|
|
RE: Clutch help - 8/20/2007 12:28:15 AM
|
|
|
Joshewuhh
Posts: 124
Joined: 8/8/2007 Status: offline
|
Either the clutch cable or slave cylinder then.
|
|
|
|
RE: Clutch help - 8/20/2007 4:32:14 AM
|
|
|
coupeRd
Posts: 7
Joined: 8/18/2007 Status: offline
|
yer but how can it be adjusted lol
|
|
|
|
RE: Clutch help - 8/20/2007 5:52:25 AM
|
|
|
Rdturbulence
Posts: 98
Joined: 7/26/2007 Status: offline
|
i had an s10 that needed its clutch bleed and it was doing similar things to what you are saying,,,or if its like in my tibby when i bought it,,,the clutch was half way ingaged due to the clutch fork being rusted and seized. your problem could be as simple as a clutch adjustment, or you may just need to change it, depending on the miles and how you drive,,its probably a good thing to do anyway.
|
|
|
|
RE: Clutch help - 8/20/2007 2:44:18 PM
|
|
|
coupeRd
Posts: 7
Joined: 8/18/2007 Status: offline
|
like u said it mite need a clutch adjustment yer so can i go about doin this this is my firt hyundai coupe/tibby so not very sure bout the car thanx
|
|
|
|
|