Heater control not working properly

Hyundai Forum Hyundai Classifieds Photo Gallery Member List Calendars Search Contact HF Sponsors
Hyundai Lineup Hyundai News Hyundai Recalls TSBs Timeslips Register Login

Heater control not working properly

Printable Version

Hyundai >> Vehicle Line Up >> Hyundai Elantra >> Heater control not working properly

Page: [1]

Message

<< Older Topic Newer Topic >>

Heater control not working properly - 9/3/2007 5:56:27 AM

hatda02

Posts: 11
Joined: 9/3/2007
Status: offline

Sometime last year my heater speed control stopped working. 0 for off of course still works fine. 1,2,3 speed setting does nothing. 4 for max works fine. I was told by a few people the heater control unit right below the radio has the resistor in it and replacing this should fix the problem. I picked up a used one and still have the same problem. Of course the used one could be bad (it was a low milage car), but I'm not so sure.

If I put my ear down in the passenger side foot area and turn the heater control to 1, I can hear the blower unit make a 'click' like it is getting a signal.

Any ideas on what I could test for? I'm at the point where I think it could be the blower motor.

Thanks ahead of time!
Dave

Post #: 1

RE: Heater control not working properly - 9/3/2007 4:35:02 PM

Doohickie

Posts: 856
Joined: 2/6/2006
Status: offline

I'm guessing it's the Blower Resistor, but it sounds like you already tried that. The connector for it is labeled "I24" in this picture:

For reference here are the schematics out of the Hyundai service manual:

< Message edited by Doohickie -- 9/3/2007 4:40:22 PM >

_____________________________

(in reply to hatda02)

Post #: 2

RE: Heater control not working properly - 9/3/2007 5:48:37 PM

hatda02

Posts: 11
Joined: 9/3/2007
Status: offline

Well.....it looks like I was told the wrong part by a couple people including the Hyundai dealer. The part I replaced was what they call the blower switch in the first pic from the SM. They told me the resistor was part of this unit.

At least I know what I need now. Thanks. I'll update after I get it installed.

(in reply to Doohickie)

Post #: 3

RE: Heater control not working properly - 9/8/2007 12:44:13 PM

hatda02

Posts: 11
Joined: 9/3/2007
Status: offline

I got the part today as pictured above (I24). This fixed the problem. The part number I picked up was 97035-3D000 and was about 45 dollars.

I wish I would have looked at the old part first. It looks like just the solder connection popped off. Oh well. It's fixed either way.

Thanks again for your help.

(in reply to hatda02)

Post #: 4

RE: Heater control not working properly - 9/8/2007 6:58:36 PM

Doohickie

Posts: 856
Joined: 2/6/2006
Status: offline

Awesome.... I'm glad it fixed it!

_____________________________

(in reply to hatda02)

Post #: 5