Timing belt and Valve Job (Full Version)

Hyundai Forums >> Vehicle Line Up >> Hyundai Accent

Timing belt and Valve Job

  

dekasaccet -> Timing belt and Valve Job (9/29/2007 6:18:33 AM)

Hello, the worse has happened, the timing belt went bad and struck a few valves.  Now I need to replace the timing belt and take off the cylinder head, so that I can take it to a machine shop to do a valve job.

I was looking for a post that would have tips and/or instructions to do these jobs, so if anyone would be so kind to direct me or give some advice, I would greatly appreciate it.  I don't want to spend over $1,000, please help.

  
Joshewuhh -> RE: Timing belt and Valve Job (9/29/2007 10:45:29 PM)

The bad news is that you're going to spend about $1,000 on replacing the bent valves, having the head pressure tested, having the head rebuilt, and doing the timing belt.
Biggest thing to be aware of with the T-belt, replace the tensioner.
I can't stress enough how 90% of timing belt failures post replacement are from not replacing the tensioner.

  

Page: [1]

Return to Hyundai Forum home page or view the Full Version of this page.