Removing car stereo face plate
#2
06-19-2012, 07:51 AM
Center Facia Panel Replacement
• When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
• Put on gloves to protect your hands.
1. Remove the mat (A).
2. Remove the upper tray (A).
3. Put a screwdriver into the space between the center fascia and crash pad.
• Be care not to damage the center facia and crash pad.
4. Separate the center facia panel (B) from the crash pad by pulling the facia as shown on the photo.
• Pull the facsia slowly not to damage the center fascia panel.
5. Pull the other side of center facia panel in the way of "step 2)".
• When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
• Put on gloves to protect your hands.
2. Remove the upper tray (A).
3. Put a screwdriver into the space between the center fascia and crash pad.
• Be care not to damage the center facia and crash pad.
4. Separate the center facia panel (B) from the crash pad by pulling the facia as shown on the photo.
• Pull the facsia slowly not to damage the center fascia panel.
5. Pull the other side of center facia panel in the way of "step 2)".
Thread
Thread Starter
Forum
Replies
Last Post
rokuez
Hyundai Accent
2
05-01-2008 06:10 PM
