Hey....
My washer fluid pump was workin fine, then it wasn't. It still spits at windshield when first activated, but then nothing. The res. is full, I've checked the lines alone the underside of hood for leaks, blockage, nada.....
can't really get to where the pump is....anyone have any ideas?

 

Sounds like a dead pump to me. It's located in the tank so you have to get to it to check.

 

3 options for pump access...

1 - remove bumper cover,, too much work

2 - from underside, flip panel out of way

3 - remove right headlamp, 3 bolt, reach down in and unplug pump and wiggle it out of bottom of washer bottle