Hello!
Save 5% off your order when you use code "FORUM5" at checkout at HyundaiShop.com!

Hi I am not sure where to post but I need and want ideas and help from anyone who will listen. I have a 2008 Hyundai Accent Hatchback 4cylinder 1.6 engine Automatic transmission. It cranks like coughing but WONT START!!!!
I have replaced the battery, camshaft sensor, crankshaft sensor, fuel pump, 4 coils, 4 spark plugs and nothing still wont start.
I used 4 scan tools all gave me sub menu codes A/T $7EF $7E9. I searched and a lot of people have gotten the same codes but didnt know the meaning.
I am out of ideas......please help!!!

Hi, I have an elantra 2013 gls and the rpms in park are 1500 to 2000. The throttle body is clean, there is no leaks anywhere, the connections and wires are fine. Can you please help me? Do I have to reprogram the throttle body? If so how?

are 2013 forte coupe coils the same as a 13 elantra coupe ?

hi can u help i have a Hyundai accent 2001 1.3 engine code at scanner is p0342 i changed cam position senor still same code comes up i have checked the voltage on the plug to the cam shaft position sensor loom and i am getting 12.6v on one wire i am getting 11.33v on the white wire and the black looks like its earth is this correct or should the 11.33v be 5v as this goes back to ecu?

Can you help me with this issue on my 2005 Elantra? Car runs Great - except after a fillup. It will occasionaly sputter or stall at idle. Below 3/4 - all is good. Above - problem.