Gots me a set of rear arms to replace on a 4wd Santa Fe... lunch time currently, need to load the arms and remove shocks, yank the springs out of their pockets, and remove front pivot bolt... last set I had to cut the front bushing/bolt out in pieces, added about an hour to the job, but I get paid the extra to go beyond normal procedure if needed.

Putting back together is easy part, new bolts, nuts, cotter pins... even the ABS sensors came out of the old rusty arms.

Also did the old VO2 Ox sensor program, and the 2.7 shift feel improvement program for the TCM.. Has an open 915 campaign, got the front bumper cover off, tubes rusted, and we don't have the part in stock.. hopefully tomorrow or Monday for part to arrive from depot.