Transmission
Thread Starter
|
Junior Member
Joined: Feb 2022
Posts: 6
Transmission
Hello to All,
I am contemplating changing my transmission oil and filter I tried you tube videos and don't feel confident as there are many approaches to this service Is it even practical to try this and are there any good step by step manuals out there to instruct me through the procedure and to specify what tools I will need and how much fluid will be needed Thank you from Ken
I am contemplating changing my transmission oil and filter I tried you tube videos and don't feel confident as there are many approaches to this service Is it even practical to try this and are there any good step by step manuals out there to instruct me through the procedure and to specify what tools I will need and how much fluid will be needed Thank you from Ken
Senior Member
Joined: Sep 2013
Posts: 2,895
Hi Ken,
Before offering any suggestions it is important to know the year and model of your vehicle because they are all different.
A lot would depend on the equipment you have to work with and your basic knowledge. Easy to suggest some things , but not smart if we don't have some idea of your capability.. Hope you understand, thanks.
Before offering any suggestions it is important to know the year and model of your vehicle because they are all different.
A lot would depend on the equipment you have to work with and your basic knowledge. Easy to suggest some things , but not smart if we don't have some idea of your capability.. Hope you understand, thanks.
Thread Starter
|
Junior Member
Joined: Feb 2022
Posts: 6
I was just so happy to find this site and in all my excitement to get registered and see it work I forgot about the car I'm terrible with computers and today's technology but I do know some info to allow you to help me with my project and am Grateful you reached back out to me Vehicle: 2016 Hyundai Sonata SE 2.4 liter engine I did figure out how to change the oil just needed car ramps and some patience actually a very simple task I watched some you tube videos I didn't like what I saw plus with the price of tools which I have none I want to just purchase exactly what I need
Senior Member
Joined: Sep 2013
Posts: 2,895
Hi Ken,
As far as tools go, there is a big difference between cheap tools and quality tools.
Even if you feel you won't use them that often. What counts is ,,,,,,,your hands and fingers. Good tools are a pleasure to use and fit properly. Cheap tools may work and maybe not. When they slip off and you bang your hands or knuckles , all of a sudden the price of a good tool becomes worth it.
You don't need to buy the best, but if possible avoid the cheap ones.
A decent set of metric combination wrenches cost a few dollars, but will serve you well.
Regular auto parts supply stores usually carry a reputable brand of hand tools. If you get to know which brands are good you can save in the long run.
Simple things like a roll of shop towels, a decent pair of safety glasses and a box of latex gloves can save your eyes and hands from damage. We only get one set of eyes and hands , so take good care of them.
Anytime we can offer some time saving steps , don't be afraid to ask. I never suggest anything where you could get hurt or damage your self or others.
If you are new at some of this, NEVER , get under a vehicle without the proper safety stands. Jacks have been known to fail and poor safety measures don't help in the MD's office.
As far as tools go, there is a big difference between cheap tools and quality tools.
Even if you feel you won't use them that often. What counts is ,,,,,,,your hands and fingers. Good tools are a pleasure to use and fit properly. Cheap tools may work and maybe not. When they slip off and you bang your hands or knuckles , all of a sudden the price of a good tool becomes worth it.
You don't need to buy the best, but if possible avoid the cheap ones.
A decent set of metric combination wrenches cost a few dollars, but will serve you well.
Regular auto parts supply stores usually carry a reputable brand of hand tools. If you get to know which brands are good you can save in the long run.
Simple things like a roll of shop towels, a decent pair of safety glasses and a box of latex gloves can save your eyes and hands from damage. We only get one set of eyes and hands , so take good care of them.
Anytime we can offer some time saving steps , don't be afraid to ask. I never suggest anything where you could get hurt or damage your self or others.
If you are new at some of this, NEVER , get under a vehicle without the proper safety stands. Jacks have been known to fail and poor safety measures don't help in the MD's office.
Thread Starter
|
Junior Member
Joined: Feb 2022
Posts: 6
Grateful
Hi Ken,
As far as tools go, there is a big difference between cheap tools and quality tools.
Even if you feel you won't use them that often. What counts is ,,,,,,,your hands and fingers. Good tools are a pleasure to use and fit properly. Cheap tools may work and maybe not. When they slip off and you bang your hands or knuckles , all of a sudden the price of a good tool becomes worth it.
You don't need to buy the best, but if possible avoid the cheap ones.
A decent set of metric combination wrenches cost a few dollars, but will serve you well.
Regular auto parts supply stores usually carry a reputable brand of hand tools. If you get to know which brands are good you can save in the long run.
Simple things like a roll of shop towels, a decent pair of safety glasses and a box of latex gloves can save your eyes and hands from damage. We only get one set of eyes and hands , so take good care of them.
Anytime we can offer some time saving steps , don't be afraid to ask. I never suggest anything where you could get hurt or damage your self or others.
If you are new at some of this, NEVER , get under a vehicle without the proper safety stands. Jacks have been known to fail and poor safety measures don't help in the MD's office.
As far as tools go, there is a big difference between cheap tools and quality tools.
Even if you feel you won't use them that often. What counts is ,,,,,,,your hands and fingers. Good tools are a pleasure to use and fit properly. Cheap tools may work and maybe not. When they slip off and you bang your hands or knuckles , all of a sudden the price of a good tool becomes worth it.
You don't need to buy the best, but if possible avoid the cheap ones.
A decent set of metric combination wrenches cost a few dollars, but will serve you well.
Regular auto parts supply stores usually carry a reputable brand of hand tools. If you get to know which brands are good you can save in the long run.
Simple things like a roll of shop towels, a decent pair of safety glasses and a box of latex gloves can save your eyes and hands from damage. We only get one set of eyes and hands , so take good care of them.
Anytime we can offer some time saving steps , don't be afraid to ask. I never suggest anything where you could get hurt or damage your self or others.
If you are new at some of this, NEVER , get under a vehicle without the proper safety stands. Jacks have been known to fail and poor safety measures don't help in the MD's office.
Thread
Thread Starter
Forum
Replies
Last Post
