2006 Sonata Engine swaaped, lots of problems HELP!
#1
2006 Sonata Engine swaaped, lots of problems HELP!
I need everyone's help in fixing my neighbor's car. She had the a used engine put in and now it's fubar. all the problems are related to the transmission. I know these guys did not do a top notch job as I put in three of the bolts that hold the engine to the transmission! Anyway here's the list of problems:
1. The shift lever won't come out of park without hitting the lock release
2. Won't shift out of first, even in manual mode
3. I got codes P0707, P0717, and P0722
I know these are for the input and output pulse generators, and the transaxle range switch. I found on the forum instructions for adjusting the switch, but I have no Idea where it is or what it's supposed to look like.
Please help me!
1. The shift lever won't come out of park without hitting the lock release
2. Won't shift out of first, even in manual mode
3. I got codes P0707, P0717, and P0722
I know these are for the input and output pulse generators, and the transaxle range switch. I found on the forum instructions for adjusting the switch, but I have no Idea where it is or what it's supposed to look like.
Please help me!
#2
I found the range switch and it looked to be adjusted properly. I cleaned up all the contacts and put it all back together with no luck. The switch didn't look exactly lke what I had found instructions for (2000 Elantra) so maybe someone can let me know if it's the same or give me the correct procedure. I found on rockauto.com they are calling the switch I was looking at a nuetral safety switch. Is this the same thing as the range switch?
#3
Check to see if the brake lights are lighting up when you try to shift ( you must have your foot on the brake to shift) The '06 had a recall on the brake light switch located at the brake pedal. If it has malfunctioned, the car will not shift.
#4
That was one of the first things I did. I got a new shifter position switch and a new output speed sensor. it's still shifting all screwy, but I figure it needs the new input speed sensor, which I'm still waiting for, to work right. I need to go get the codes read again.
Thread
Thread Starter
Forum
Replies
Last Post
Blondie
Hyundai Santa Fe
1
02-27-2007 10:23 PM